咨询热线19858242261      微信同步

按照欧盟MD机械指令的法规要求，注塑机属于ANNIX IV危险机械，需要由欧盟公告号拥有危险机械条款10. Injection or pression plastics-moulding machinery with manual loading or unloading授权的机构进行测试认证，颁发EC-TYPE证书

为您专业解读注塑机CE认证：

1、注塑机欧盟CE认证指令

MD机械指令：2006/42/EC

2、注塑机欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN ISO 20430:2020 Plastics and rubber machines - Injection moulding machines - Safety

requirements (ISO 20430:2020) 塑料和橡胶机械.注塑机.安全要求（ISO 20430:2020）

3、EN ISO 20430:2020适用范围：

This document specifies the essential safety requirements for the design and construction of injection moulding machines for the processing of plastics and/or rubber and provides information for their safe use.

This document is applicable only to injection moulding machines with hydraulic and/or electrical drives for platen movement.

This document deals with all significant hazards, hazardous situations and events relevant to injection moulding machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) during the life cycle of the machinery (see ISO 12100:2010, 5.4).

The following are not covered:

— machines on which the clamping unit can only be operated by the physical force of the operator;

— machines for which the hydraulic jack can only be manually operated;

— injection blow moulding machines;

— machines for reaction injection moulding;

— pression moulding machines and transfer moulding machines;

— direct-on sole moulding machines, unit sole and footwear ponent moulding machines, full shoe and boot moulding machines;

— design of an exhaust system;

— design and construction of the mould.

NOTE Moulds and exhaust systems are not part of the machinery.

This document is not applicable to injection moulding machines which are manufactured before the date of its publication.

本文件规定了塑料和/或橡胶加工用注塑机的设计和施工的基本安全要求，并提供了安全使用信息。

本文件仅适用于带有液压和/或电动传动装置的注塑机，用于台板移动。

本文件涉及与注塑机相关的所有重大危险、危险情况和事件，当注塑机按预期使用时，以及在机器生命周期内制造商可合理预见的误用条件下（见附录A）（见ISO 12100:2010，5.4）。

以下内容不包括在内：

--夹紧单元只能通过操作员的体力在其上操作的机器；

--液压千斤顶只能手动操作的机器；

--注塑机；

--反应注射成型机；

--压缩成型机和转移成型机；

--直装式鞋底成型机、整体式鞋底和鞋类部件成型机、全鞋和靴子成型机；

--排气系统的设计；

--模具的设计和施工。

注：模具和排气系统不是机器的一部分。

本文件不适用于在其发布日期之前制造的注塑机。